Progress PHP5325X Instrukcja Użytkownika Pobierz pdf (Strona 28)

1

2

2. Pull the rear end of the shelf support

away from the side wall and remove it.

Installing the shelf supports

Install the shelf supports in the opposite se-

quence.

Important! Valid for telescopic runners:

The retaining pins on the telescopic runners

must point to the front.

Lamp

Warning! There is a risk of electrical

shock.

The lamp and the lamp glass cover can

be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

Caution! Put a cloth on the bottom of

the interior of the appliance. It prevents

damage to the lamp glass cover and

the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1. Turn the lamp glass cover counter-

clockwise to remove it.

2.

Remove the metal ring and clean the

glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Attach the metal ring to the glass cov-

er.

5. Install the glass cover.

Cleaning the oven door

Removing the door and the glass panels

You can remove the oven door and the in-

ternal glass panels to clean it. The number

of glass panels is different for different

models.

Warning! Be careful when you remove

the door from the appliance. The door

is heavy.

A

A

1.

Open the door fully.

2.

Fully press the clamping levers (A) on

the two door hinges.

3.

Close the oven door to the first open-

ing position (approximately 70° angle).

4.

Hold the door with one hand on each

side and pull it away from the appli-

ance at an up angle.

5. Put the door with the outer side down

on a soft cloth on a stable surface. This

is to prevent scratches.

28 progress

1 2 ... 23 24 25 26 27 28 29 30 31 32

Komentarze do niniejszej Instrukcji

Brak uwag