
• Make sure that the mains plug is accessi-
ble after the installation of the appliance.
• Connect to potable water supply only (If a
water connection is foreseen).
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
are recyclable.
CONTROL PANEL
Functions
1 2
3456
1
ON/OFF button
2
Display
3
Temperature warmer button
4
Temperature colder button
5
OK button
6
Functions button
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Functions button and Temperature cold-
er button for some seconds. Change is re-
versible.
Display
ABCDEFG
A) Timer function
B) Intensive Cooling function
C)
Drinks Chill function
D)
Fast Freeze function
E) Child Lock function
F) Alarm indicator
G)
Temperature indicator
Switching on
To switch on the appliance do these steps:
1.
Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3.
The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "Door open
alarm".
If “DEMO” appears on the Display, the
appliance is in demonstration mode: re-
fer to “Troubleshooting” paragraph.
4. The temperature indicators show the
set default temperature.
18 progress
Komentarze do niniejszej Instrukcji